1.
A heavy load should not be placed on one side of the trailer because:
2.
A long, heavy load on a single unit truck should be placed:
3.
After working 120 hours in a 14-day cycle, drivers must take ____________ hours of off-duty time before working 70 hours of on-duty time.
4.
Anti-lock braking systems (ABS) are:
5.
Adjusting your head restraint so that it is at least level with the top of your ears is:
7.
Drivers who are exempt from wearing seatbelts are:
8.
A red triangle Slow Moving Vehicle sign should be placed on any vehicle that travels at less than:
9.
A tie-down assembly is made of:
10.
Drivers on an 14-day cycle must not drive after ____________ hours of on-duty time in 14 consecutive days.
11.
A vehicle that is twice the weight of a car and is traveling at twice the speed of that car requires how much braking power to stop in the same distance:
12.
During a pre-hill inspection on a vehicle equipped with hydraulic brakes, you should:
14.
A swerving and whipping trailer can be caused by:
15.
A tiedown should not be used for cargo securement if:
16.
A passing lane has just opened up on a long narrow stretch of highway. The truck is traveling very slowly. The driver of the truck should:
17.
How do you downgrade from a commercial to a non-commercial licence?
18.
Drivers on a 7-day cycle must not drive after ____________ hours of on-duty time in 7 consecutive days.
19.
Amber flashing lights can be mounted on a vehicle if:
20.
Braking forcefully when driving a combination-unit vehicle may cause:
21.
A trailer hand valve should not be used to hold a unit that will be left unattended because:
22.
How do you know you are turning the adjusting bolt in the correct direction when adjusting a manual slack adjuster?
23.
How often should you make en route inspections of your vehicle?
24.
An overload caused by poor distribution can:
25.
A controlled railway crossing may have: